1986 Chevy Military Utility Truck 12500 miles N/R

1986 Chevrolet Other Additional Info:

1986 Chevy Diesel MilitaryTruck (M-1031). These truck are heavy duty rated as a 1 1/4 ton truck. The truck has 12,500 original miles. I bought the truck with 600 original miles and have used it for hauling my construction tools. The rear box is made of aluminum and in very nice condition. I removed the generator and air compressor as it was very large and heavy. I replaced the generator with a large 24 volt winch which can pull cars with all flats and have no problem. I added a Reese hitch to the truck.The truck is a 24 volt with two batteries and alternators. The batteries were just replaced and the alternatorsrebuiltlast year. The interior of the truck and lights are12 volt.

Dana 60 front axle and 14 bolt rear. The original gear ratio was 4.56 but the truck had a max speed of 55 mph. I had the rear axel changed to 3.73 gearratio with the entire rear end being professional rebuilt. I removed the front drive shaft as the frontgear ratio still needs to be changed from the 4.56. The truck can be driven on thefreeway nowwith no problems. The 4 wheel drive did work great prior to removing the front drive shaft. The drive shaft will be included with truck. The truck has never seen a winter and was originally purchased from Georgia. The truck has no rust but the paint is shot from the sun and will need sanded and repainted. There is a dent on the drivers door from the military moving the truck with a fork lift. The drive shaft was also bent from this and I replaced it after purchasing the truck. The truck has a6.2 gm diesel that runs great. The glow plugs are on a push button. Hold the button down for 10 seconds and the truck starts right up.

The truck has a chain driven transfer case withPTO hook up. The front tires have approximately 50% tread and the rear tires were replaced last year and are 90% tread. The truck comes with a BOS stereo / cd player. All gauges work good but the speedometer does jump around once in a while at speeds of 75-80mph. The tools in the bed of truck will be removed. If you do not want the winch I will take $500 off the ending price and remove it prior to pick up. Feel free to EMAIL or call me with any questions or for more photosChuck 231-821-2898. Thank You.