72 dodge demon 440 dana trans brake

1972 Dodge Other Additional Info:

Ive owned this demon 9 yrs came from the state of Washington as a 318 auto AC car. i have put all the fun stuff in it connected the frame added 6 point street cage put i nice running 440 with 750 holley vacuum secondary carb which is brand new has tti 2 1/8 chrome headers with 3 inch exhaust with manual cut outs exhaust is aluminzed and welded joints and comes out in stock position motor is backed up with 727 manual shift reverse valve body and a trans brake with deep aluminum pan trans cooler with aux fan separate from radiator the car always runs cool even on the hottest days big aluminum rad gets the job done the drive shaft was built with 3510 series spicer joints and the rear is a Dana 60 posi with a 4.10 gear and 35 spline moser axles koni single adjustable coil over shocks front end has new heavy duty double action shocks and new strut rod bushings and lower control arm bushings. the brakes are factory mopar fronts and wilwood disc on the rear master cylinder is 15/16 bore and are manual along with the steering both work well stops and steers easily. the rear tires are hoosier dot approved street slicks 29 x 13.50 x 15 car hooks well in dry weather no so good if you get caught in the rain LOL!!!interior is very nice new carpet console seat covers this demon has a line lock located next to shifter in the console and the console has been modified to except aftermarket shifter with trans brake button on top of it. the car was painted base clear B5 blue and has mattte black stripes and factory hood scoop car had minimal rust as you can see the only rust on the car are the trunk drops rite behind the rear wheels about 2inchs square which have been left open to prevent any further debree entrapment which would lead to further rust issues i dont know much about the components in the engine i bought it already built off a friend who took it out of his dads race car it ran 12.20s with old 850 and a little more timing in the Demon 1/4 mile it does have solid lifter cam and adjustable rockers factory chrome valve covers and edelbrock torquer intake any questions call me i can help with delivery any where in the US a neighborhood friend is a transporter thanks for your interest sorry about the lengthy description but try to answer everything with out a phone call but im always here at 724 944 5646 call before 9pm eastern standard time please thanks Steve