/ /

1992 DODGE W250 CUMMINS EXTENDED CAB 5 SPEED

1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
1992 Tan Dodge Other Pickups
Make: Dodge
Model: Other Pickups
Type: Extended Cab Pickup
Trim: BASE
Year: 1992
Mileage: 126,500
VIN: 3B7KM23CXNM543956
Color: Tan
Engine: 5.9
Cylinders: 6
Fuel: Diesel
Transmission: Manual
Drive type: 4WD
Interior color: Tan
Drive side: Left-hand drive
Vehicle Title: Clear
Item location: Milton, Wisconsin, United States

1992 Dodge Other Pickups BASE Additional Info:

1992 Dodge W250 that I bought 5-6 years ago that was completely untouched and I bought it from a huge farm in Washington I believe I am the second owner. I did a 2 inch lift all springs and while I was there I did the steering all new tie rods, steering box and adjustable drag link. Then I went to the front axle new kingpins, bearings and new lock outs. the trans was acting weird so I bought a rebuilt getrag and did a upgraded clutch and upgraded clutch hydraulics and then had the rear driveshaft ujoints done and carrier bearing replace and balanced. Then I did the rear axle with new bearings etc.. And I did a disk brake conversion that is all bolt on from tsm manufacturing with new calipers with e-brake so while I was doing that I did an ubolt flip and different shock mounts and put bilstien 5100 shocks on. Tires are 35x12.50r17 with new rims and I have a spare new rim that will go with the truck.
With the engine I did the killer dowel pin fix and since I was there I put a new thermostat and belt ten. I then also put a new radiator and new upper and lower hoses and all new coolant and put on a new block heater cord on the truck.
Then I did a 3200 governor spring and a denny t stage 2 fuel pin and turned the fuel up until almost run away and backed off the screw 1 turn so it will be safe so these trucks kill your engine stop solenoid so I put in a pull cable to shut the engine down.
I also had the hood, fenders, valance and got new doors for the truck and had them painted. The cab and bed still need to be painted. I also put a new grill shell on only thing I need to do is carpet which I have (mass back carpet) and I want to do a new seat.
I also put cruise control on it so being an old manual the cruise is nice to have. I also redone the ac system and converted it to 134a. New compressor, dryer, hoses etc...
I don't have any current pics as the weather has been crappy. I imagine there's more stuff I did but I can't remember off the top of my head. I do spray the underside of the truck with fluid film (rust preventer) ever year so the underside looks good with no rust.
Hopefully the weather will be nice and I can get more pictures of the truck.
If there is anything else you want to know about the truck just message me.

On Mar-08-17 at 17:08:16 PST, seller added the following information:

Edit 1 Sorry about the added photos it wasn't a nice day out so I took the pictures while the truck was still in the garage.I forgot to add I put on a diamond eye 4" turbo back exhaust with a Donaldson 51" mufflerIt has a factory tachI added a curt hitch as it never had a hitch on it until I bought the truckI added a Hopkins InSIGHT Flex-Mount Trailer Brake Controller

On Mar-08-17 at 17:13:55 PST, seller added the following information:

Edit 2Sorry the truck looks horrible I haven't had it out of the garage since before winter time.