Make: | Chevrolet |
Model: | Impala |
Type: | 4 door wagon |
Trim: | Nomad |
Year: | 1960 |
Mileage: | 53,000 |
VIN: | 01835T113816 |
Color: | Silver |
Engine: | V8 283ci |
Cylinders: | 8 |
Fuel: | Gasoline |
Transmission: | Automatic |
Drive type: | RWD |
Interior color: | Red |
Vehicle Title: | Clear |
Item location: | Glenview, Illinois, United States |
Power was a priority and the original 283ci V-8 was retained and upgraded. The StreetHeat team removed it., disassembled it., inspected the internals, put it back together, and then detailed it Reassembly included an aluminum intake with an Edelbrock 550-cfm four-barrel carb. The nostalgic looking two-barrel air cleaner was retained but modified to accommodate the new, bigger carb.Benefitting from the increased fuel/air mix, Power Pack heads replaced the originals for increased breathing, and spark flies from the modern MSD electronic ignition and billet distributor. Again, fornostalgic reason, they retained the factory exhaust manifolds but added ceramic coating for anupdated touch. The new 2.5-inch mandrel bent exhaust makes its way through the factory X-frame, over the rear axle, and exits at the rear. Alan Grove brackets were used to swap the original generator for an alternator and adapt the new Vintage Air compressor. A/C hoses were carefully hidden to keep the engine compartment clean. As a final upgrade, they eliminated the original two-speed Powerglide transmission and replaced it with a modern 700-R4 automatic.
The real personalizing process however, began underneath. While much of the Nomad chassis is still original,everything was inspected, worn parts were replaced, and all new bushings added.To give the wagon the proper StreatHeat stance, the first major mod was a full AirMaxxx air suspension kit with 2,600-pound RideTech bags on all four comers.To keep everything out of sight, the mechanicals for the air system were grouped into the spare tire well.Energizing the system is a Viair 480 compressor, 5-gallon reserve tank, and Air Lift actuators that feed through 1/4-inch lines. A Viair gauge on the dash monitors everything and rocker switches control the altitude. Stopping power was next, and the installation of Corvette C6 power brakes with 13-inch rotors up front, coupled with upgraded drums in the rear, gave the vintage wagon modern braking capability. Getting the car rolling in style are Billet Specialties Daggers 20xl0 in the rear and I8x8 up front Nankang rubber connects the ride to the asphalt with 275/30ZR20s in the rear and 255/40ZR 18s up front.
PLEASE CONTACT WITH ANY QUESTIONS PRIOR TO BIDDING. THE CAR IS BEING SOLD AS IS WITH NO WARRANTY, I ENCOURAGE YOU TO COME TAKE A LOOK AT THE CAR PRIOR TO PURCHASE. SHIPPING IS THE BUYERS RESPONSIBILITY, I WILL BE HAPPY TO ASSIST WITH THE PROCESS. I HAVE BOUGHT AND SOLD MANY CARS. $1000 DEPOSIT DUE 24 HOURS AFTER AUCTION ENDING. THE BALANCE IS DUE WITHIN 72 HOURS OF AUCTION ENDING. I HAVE A CLEAR TITLE IN HAND FOR THE VEHICLE. GOOD LUCK BIDDING!
On Dec-08-16 at 18:16:08 PST, seller added the following information:
I FORGOT TO MENTION THIS CAR WAS FEATURED IN SUPER CHEVY MAGAZINE. I WILL POST PICTURES OF THE ARTICLE, ITS ALSO ON SUPER CHEVYS WEBSITE