1990 Volkswagen Corrado vr6

1990 Volkswagen Corrado Additional Info:

•1990 VW Corrado
•101,XXX miles
•24v vr6 BDF engine swap
•VEMS (Lugtronic) standalone
•Full, brand new tefzel wrapped wiring harness custom made to wire directly to VEMS standalone. Everything from fuseblock forward has been redone (Lighting, Trans, Engine harness) was made by Caste Systems Performance in NJ. Wiring is best investment I ever made, never have an issue with the car starting and is wired for boost controller (BOOST READY YAY)
•Tuned by Kevin Black
•16x9 et 25 BBS RS all around. Refinished with new lips, gold bolts, black/gold caps and polished. I run 25mm spacer in the rear and 15mm spacer in the front.
•300mm Momo Team Steering wheel
•Spoonfed 70mm front spoiler
•Spoonfed backlit gauges
•10lb autotech flywheel
•OEM Vr6 clutch
•O2a transmission
•Neuspeed Short shifter
•New transmission Cables
•BFI stg 2 delrin mounts
•HPA Clone SRI
•630cc Siemens Injectors
•4 Bar FPR
•Hardlines by Swoops VC Breather(dumped to ground) with -10an Fitting pressed in
•Edelbrock 70mm TB with custom intake pipe and filter
•New coilpacks & plugs
•Bluewater PCV block off plate (anodized red finish)
•Brand new French Ecodes from Zeb at 1stvwparts
•Like new French fogs/turns
•New vr6 grill w/ color matched vr6 emblem
•Shaved: rear wiper, antenna, exhaust cutout, front turn signals
•Custom pulled fenders
•Repainted in 3 stage Firespark Red Metallic (OEM VW Color from Scirocco R. I will give you the paint code and mix formula with all details of how 3stg paint was done in order to replicate). Standox Basecoast and Sikkens clear.
•Shaved engine bay (needs to be repainted to match exterior of car - it is Tornado Red right now)
•Smoked tail lights
•New windshield
•Replaced all window seals and gaskets
•Custom 3" v-banded Magnaflow exhaust with turn down tip
•All brand new hardlines for braking system. Replaced rear prop valve and Stainless steel brake line connections to the calipers
•New Brake Master cylinder
•New Clutch Master & Slave cylinders
•New ebrake cable
•New crack pipe and 12v thermostat housing with low temp thermostat
•New girling g60 front calipers
•New Hawk pads on the front
•Recently replaced Valve cover gasket and Oil pan gaskets
•New Drilled/Slotted rotors in front
•R32 control arm bushing kit and poly strut mount bushings in the rear
•SLC Tan leather interior swap
•10" sub w/headunit and all brand new wiring just recently installed
Pros: Get in and go. Show stopper. Beautiful car for someone to finish.
Cons: Engine bay is still tornado red. I had intentions to get it painted to match the exterior this winter.
Asking Price:
$10,000