/ /

1956 Porsche 356 Speedster

1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
1956  Porsche 356
Make: Porsche
Model: 356
Trim: all correct badges
Year: 1956
Engine: 2180 cc 190hp
Fuel: 93 octane
Drive type: RWD
Vehicle Title: Clear
Item location: Lake Charles, Louisiana, United States

1956 Porsche 356 Additional Info:

Fiber - Fab 1956 Porsche 356 Speedster
Located in Lake Charles, Louisiana
This is NOT on a V. W. frame; it is titled as 356 Speedster
The body is on a beefed-up square tube frame, not V.W. front end. Has new coil shocks. Everything has been upgraded because it has a190-HP 2180cc engine just built. Every part in engine is the best of the best, $10,000.00 for engine.
List of some of the 25 items done or installed:
MURZI 2180 82x92 (NOS As 21 case), 82 mm PAUTER (rare) Crank, 311-B rods, Mahle forged pistons & Cylinders balanced, Grant rings; hand-gapped to each cylinder, 9.2:1 compression, 8-dowel flywheel (lighted), Kennedy stage one pressure plate, Daiken disc, CB chromoly push rods (cut to length), W 120cam .541" lift (lobes hand deburred & clearance), CB 044 heads ported, 26mm Shadeck oil pump (lapped on glass to zero deck), 44 Webbers, 36 vents jetted (55/150/200).
Custom breather box and much more.{Ported, Blueprinted, Balanced, lapped with glass}, Red 6200RPM_ Timing--32 degrees BTDC_ premium gas only.
The car has a 28-coat paint job (5 primer, 5 paint, 9 clear, silver metal flake, and 9 clear gold meat flake. Has had pin striping - the best. Paint, pin stripping done in Houston, TX.
(11K), car taken completely apart and took 4 months before I got it back.
I have 2 tops (one new), and two sets of wheels and tires. The Fusch 15" wheels or 1958. Have real Porsche nerf bars (NOT VW) - They would cost extra RARE. Because of HP :disc brakes all around, shifting rod had brass bearings made andshifter came from Germany, $400.00.
I also have custom-made 1 and 5/8" exhaust to handle 190-HP motor. I also have a Bernie Bergman 911 (BLOWER) Porsche kit that will go with car KIT and shroud paintedcolor of car.
Every thing is either new, one-off, rebuilt, or aftermarket.
It is a dream at 75. It has won nothing but first place, and it loves to beat Corvettes and big trucks.
Buyer pays for shipping and a $500.00 Paypal deposit due within 24 hours of listing close.