| Make: | Ford |
| Model: | Bronco |
| Doors: | 2 |
| Year: | 1979 |
| Mileage: | 123456 |
| VIN: | U15HLFE2933 |
| Color: | Green |
| Transmission: | Manual |
| Interior color: | Black |
| Vehicle Title: | Clean |
| Item location: | Cibolo, Texas, United States |
1979 Bronco. Runs & Drives, Clean title. Not Beautiful.
400ci V8 6.6L, with T-18 4spd.
NP 205 Transfer case, 4x4 works I’ve replaced hubs and had driveshafts u joints replaced.
No engine or coolant leaks. No smoke, it is rich and has some right bank popping, (prob carb adjustment)
T-case does show some wet surfaces but no puddle underneath (prob a gasket kit)
6 inch suspension lift, 3 inch body lift. 40inch tires.
Sterling 10.25 Rear 8 lug axle. Rear ladder bars
79 f250 8 lug outers on dana 44 front axle. Front sway bar
Interior was stripped with racing seats and 5 pt harness. I removed them and put the correct type of low back bucket seats with their original red fabric. I have brand new carpeting in box (jade green)
Floor is solid had been covered with bedliner spray.
Installed new seat belts.
Replaced door panel plastics, and I’ve replaced the window rollers in both doors (I then broke handle off the new one on passenger side, so I bought another and haven't installed it yet)
Have the headliner removed and new material to get it covered. Still in box.
Sent the dash cluster out for rebuilt. It’s still in the box in the bubble wrap.
Needs a turn signal switch purchased and installed for blinkers and brake lights.
Has Vintage Air A/C installed and operates AC and Heat, currently has no interior insulation.
At some point I lost the keys, so I replaced the ignition switch and ignition key.I don’t have keys to match the door locks. The tailgate key switch doesn’t work just like all the broncos of this age.
No major rust but there are 3 spots in the door jamb, and some previous repair bubbling thru the bottom of door skin.
Replaced rusted tailgate with an original 78-82 new unused shell. Replaced all tailgate internals. I didn’t get the mounting aligned in straight, so one side sticks out which makes window only roll up like 95%. Needs bolts loosened and realigned.
The clear coat is peeling.
It needs TLC to be finished...
Located in Texas 78108