1969 Mercury Cougar Blacked Out

1969 Mercury Cougar Blacked Out Additional Info:

Up for your consideration is a 1969 Mercury Cougar base model that has been transformed into a black Eliminator recreation.

This Cougar still has its original drivetrain from its 351 Windsor engine to the FM 3 speed transmission and rear end.

Power steering, manual drum brakes.

I bought this car from a private seller and I planned to do work on the car for some time but things change and I won’t have any time now. To be very honest, this car needs a lot of work, as stated beneath. If you want a project, this is it.

The 351 engine works very well. New valve cover breather and a PCV Valve. New carburetor. Edelbrock Performer intake manifold 4bbl. Recent timing chain. New

Fuel pump, need some work. New transmission cooler. The radiator was hot tanked and pressure tested. Red hose replacement from heater core so someone has replaced heater core at one time. A new gas tank and sending unit also have been replaced. New rear end fluid too.

A updated rear Turn Signal Brain was bought from Ken's Cougars. Interior lights work. Wipers work. Heater motor has been intermittent. New windshield also.

Rare Factory Correct Rally Rims for 69/70 Cougars. Old Goodyear Eagle ST's which still have the blue Factory Paint in the grooves and the knobs on the side. This Cougar even has a full size rare rim spare with a new Eagle ST on it.

New year correct center caps with new chrome trim rings. Tires are 215/70/14's.

The information about the Body comes from the previous owner.

The body of this Cougar has been ground down to bare metal. DP-90ed and several coats of high build primer was applied. Block sanded and looked at and then more high build primer to get car very straight. Then 4 coats of DUPONT'S Ultra Jet Black was applied. The darkest of dark blacks. Then numerous coats of clear coat. Color sanded with 800 grit sandpaper. Then 1200,1500,2000. All work was done professionally at local place. The Cougar was then compound buffed after the color sanding then polished and then micro polished. The Eliminator decal kit was then applied correctly.

This are the things I know that needs to be done.

STEERING & SUSPENSION

Spring Saddle Bushings cracked

Strut Bar Bushings cracked

Power steering hoses leaking

Control valve may need rebuild

Power cylinder may need rebuild

ENGINE/TRANSMISSION

Transmission shifter seal leaking

Transmission pan leaking

Heater hoses cracked including bypass hose

Needs new Fuel filter

Throttle bracket incorrect

Cap

Rotor

Petronix or Points

Headlight Vacuum motor seal is missing – need rebuilt vacuum motor

E-brake rusted and frozen release

Rebuild entire rear brake system

EXTERIOR/UNDERBODY

Tail panel has numerous rust out areas

Driver’s door and fender full of filler

Drivers floor and torque box have substandard repairs done

Passenger floor and torque box have substandard repairs done

Bumpers are pitted

Passenger door glass falling out

Passenger rear quarter window is form a 1970

INTERIOR

Many items in the interior need to be refreshed

Heater cables do not function

Heater fan does not work (wiring)

Instruments do not work

Turn signals do not work

Headliner falling down at back and sides – wrong grain

Trunk lid seal not installed

The car is being sold locally as well and I reserve the right to end the auction if a fair price is not met. It is being sold in AS IS condition with no expressed warranty.

I have some replacement parts:

Lenses - Backup / Reverse Light - w/ Gaskets – PAIR

Plasma LED - RED - Complete Six Pack Replacement 1157 Bulbs – New

If you have any questions or concerns about the car, please email me or call and we can go over what's what with this car. Any additional photos upon request. 425 615 9626