Factory Five MK# AC Cobra Roadster Show Pro Built Classic Muscle Race Collector

1965 Ford Other Roadster Additional Info:

FACTORY FIVE MK3 ROADSTER COBRA
szplwfuia.jpg"/>
Frame:
SERIAL # F5R1004946RD YEAR: 2005 VIN NH010257
NH TITLE
Complete jig-welded original style 4” round tube frame.
• Chassis powder-coated black
• Chrome 3-point roll bar
Body:
FORD KM Blue base-coat/clear-coat
Stripes GM# arctic White
Hand laid 3/16” laminate composite body and panels made with vinylester resin.
• Driver and passenger doors with molded door liners and integral steel door frames
• Hood with molded hood liner, and separate hood scoop
• Trunk with molded trunk liner and improved mount face for license plate light
• Secondary body fasteners
• Adhesive backed and foam weather-strip
• C-channel door edge trim and fasteners
• Plastic end caps and body fasteners
• Trunk and engine bay seal, push on rubber bulb seal
• Rubber hood and trunk bumpers
• Multi-adjustable door hinges with bronze bushings and fasteners
• Adjustable hidden trunk hinge kit, hinge mount plates and fasteners
• Includes hood hinge kit with hydraulic piston supports and fasteners
• Original quick-jack comp bumpers with stainless steel sleeves and fasteners
Chassis Aluminum Panels:
Over 40 laser cut, pre-formed 6061-T6 aluminum panels for cock pit, trunk, and engine bay.
• Complete MK4 cockpit aluminum with block-off plates and covers
• Engine bay aluminum assembly with aluminum nose sections and splash guards
Complete Front Suspension:
Unequal length A-arm control arms with coil-over shock suspension.
Chrome front & rear bumpers
• KONI brand high-performance mono-tube, rod-end shock absorbers
• Adjustable Coil-over shocks
• Adjustable upper control arms with ball joints and fasteners
• Lower tubular control arms with ball joints and fasteners
Rear Suspension:
• FFR Deluxe 3-Link suspension kit with rear-end brackets, upper link kit, and fasteners, panhard with rod-ends 8.8 rear diff. 3.73 rear gears.
• High performance mono-tube, rod-end shock absorbers
• Adjustable Coil-over Shocks
• Factory Five tubular rear lower control arms with polyurethane bushings
Brake Kit:
• SN 95 style spindles with integral upper ball joint mount
• Front hubs and dust covers
• Front Brakes, Ford Mustang GT 11” front brakes
• Master cylinder, stainless braided brake lines front
• Emergency brake handle assembly with leather boot
Complete Steering System:
Complete Flaming River steering system with vintage steering wheel and badges
• Manual steering rack with inner and outer tie rod ends
• Polyurethane steering rack bushings
• Nickel plated lower steering shaft (fully welded U-joints)
• Collapsible upper steering shaft, with friction washers
• 14” vintage wood and aluminum steering wheel
Complete Fuel System/Parts:
OEM style fuel tank and system.
• OEM style fuel tank
• Flared fuel lines (1/4” and 5/16”) with unions, barbs, hose clamps and high-press flex lines and fasteners
• Aston LeMans style polished aluminum fuel cap with integral pressure cap
• 3/8” line, fuel filter
Complete Cooling System/Parts:
• Electric cooling fan with adjustable thermostat
• Aluminum radiator
• Stainless steel radiator hoses
• Stainless overflow tank
Engine Accessories/Side Exhaust:
- Ford Racing Crate Motor w/ Serpentine Conversion set: 302 cu. in. 345 HP painted to match the car, Aluminum heads
- Tremec M-7003 T-5 Transmission painted to match the car
- Blowproof Bell Housing painted to match the car
- Ford Racing A302 Clutch & Pressure Plate, painted to match the car
- Ford GT 40 Manifold set painted to match vehicle
- Chrome Alternator
- New MSD Distributor w/ Red Silicone Injection Wires
- Ford Motorsport Chrome Valve Covers
- Pro M 80mm Mass Air Meter
- Aluminum Radiator Hose Filler
- Chrome Cold Air Tube
- Chrome Alternator
- Tremec T-5 Transmission
- Ford Racing A302 Clutch & Pressure Plate
- 4-into-1 side exhaust, bare steel with rubber hanger brackets
- J-pipe header-to-side exhaust adapter, Full tubular headers
- Oil filter relocated
- Spin-on engine block adapter
- K&N performance air filter
Gauges, Dash, and Electrical Assembly:
- Integrated wiring harness
- Vintage performance gauges.
- Covered aluminum dash, dash buttons, toggles and indicator lights, switches, and horn.
- Padded dash cover, black vinyl
- Cole Hearse Ignition switch, headlight switch, three-position turn signal switch, starter solenoid and horns.
- Cole Hearse Battery shut off switch
- Red, green, and blue dash lights
- Insulated line clip hardware and fasteners
- Battery ground strap
- Trunk mounted battery
- Complete set of seven Autometer electronic gauges, including the following gauges:
• Speedometer
• Tachometer
• Oil Pressure Gauge
• Water Temperature Gauge
• Fuel Level Gauge
• Voltmeter
Complete Interior Accessories:
Authentic style seats, door latches, toggles, rear view mirror
• Authentic style roadster metal framed seats, black vinyl
• Simpson seat belt harnesses
• Complete cockpit carpet set, black all-weather
• Emergency brake boot, black leather
• Authentic interior rear view mirror
• Original style door latches, & leather check straps
• Authentic stainless shifter handle, shift knob, boot, polished ring
• Authentic 14” wood and aluminum steering wheel with polished aluminum boss and small center badge
Exterior Accessories and Lighting:
- Halibrand Style 15" Wheels
- Ceramic Coated 4 into 4 Side Exhaust
- Chrome Fire Extinguisher
- Tonneau Cover
• Authentic chrome-on-brass vintage windscreen, tinted with side bars
• Authentic style three-lock set including T-trunk handle, L-shaped hood handles
• Authentic license plate light and bracket
• Authentic style 3.5” Aston roller gas cap, polished cast aluminum
• Aluminum side louvers
• Ceramic FFR badging
• Original style headlamp assemblies
• Original style British front amber turn signals, and red rear tail-lights
• Authentic bullet style sideview mirror
Complete Pedal Box and Components:
Wilwood brand pedal box
• Master cylinder, clutch cable, threaded firewall adjuster
• Accelerator pedal, accelerator cable, & return spring
• Brake line adapters and T-fittings
Oil Filter Relocater/Alternate Drive Pulley Assemblies:
Oil filter relocation kit with all hoses to help 302 EFI
• Oil filter relocation kit
• Spin-on engine block adapter
• Alternate drive pulley, spacer, pulley wheel
• Fan belt, six rib
Professionally built by Nor'East Replicas in 2005 Factory Five MK3 Shelby AC Cobra. This vehicle was a new build, done correctly with many extras, has been well taken care of and is in impeccable condition. Dyno tuned & looks unbelievable and runs beautifully. You have to experience this car to believe how tight it is.
That said, This Factory Five 1965 AC Cobra Replica, is the roadster everyone talks about. With a HP302 small block, Tremec 5-speed, it remains an excellent example of 'bragging rights' in the muscle car world.
Run’s and drive excellent!
No Disappointments here! If you are looking for that Super Clean Factory Five AC Cobra roadster replica with a Laser Straight Body, Mirror Finish Blue Paint.
This is the car you have been waiting for!
Asking $40.000 Offers Considered.
Our vehicles for sale or auction offer our customers the best in pre-owned cars. You can buy with confidence and SAVE $ $ $ ! & TAKE ME HOME.
We at Ron's Toy Shop Inc. work very hard to accurately describe our vehicles through text descriptions and elaborate photos. You are bidding on a pre-owned vehicle! Any used vehicle can have normal wear and blemishes. Before placing a bid please read the descriptions thoroughly and view all pictures. We are happy to help you!
For more information please call 603-669-9682 or 603-731-3154
Located at: stored off site
Ron’s Toy Shop Inc.
235 Elm St
Manchester, NH 03101-2707
This vehicle is offered as is as shown, with all defects known and unknown. We ask that you please come and inspect this vehicle prior to placing a bid or offer. Shipping is not included, We can assist your shipper as needed.
Thanks for Looking!