/ /

1991 Eagle Talon TSi Turbo FWD - DSM

Make: Eagle
Model: Talon
Trim: TSi Turbo
Year: 1991
Mileage: 171,000
VIN: 4E3Cs54u6me016030
Engine: 2.0 Liter
Cylinders: 4
Transmission: Manual
Drive type: FWD
Vehicle Title: Clear
Item location: Van Alstyne, Texas, United States

1991 Eagle Talon Additional Info:

This is a 1991 Eagle Talon TSI Turbo FWD 5-Speed. I've owned this car for 10 years, treating it more as a project car than a daily driver. In that time, I've probably put only 1,000 miles on the car. The car is showing 170K on it, and the cylinder head was overhauled before I purchased the car from a woman co-worker of mine.


Over the years I have gone through the car and replaced whatever needed replacing. This included the ECU, Throttle body, ISC, O2 sensor, plugs and wires, timing belt, alternator, power steering pump, plus all belts, fluids and filters among other things. The car started and ran great, and pulled like a train.


From a suspension standpoint I replaced the drive axles, A-arms, shocks, springs, brakes and brake rotors. The springs are Eibach and the shocks are KYB, which together mildly firmed up the ride. The wheels are from an Acura RSX and are in perfect condition.


The car has no rust, but does have some minor dings that can be removed with paint-less dent repair (I was quoted $300-$400 to do everything). The front air dam has damage, but I'll include a replacement.


I was in the process of replacing the carpet, so the interior was removed, but I was getting tight on time and put the car into indoor storage for a few years with gas stabilizer. The car was started periodically without problems.


Unfortunately, in moving the car back to my garage, a noise from the transmission was heard when the car was in neutral and your footwas off the clutch (it went away when you stepped on the clutch). Assuming it was the throw out bearing, I ordered a new one, dropped the transmission, replaced the throw out bearing, but after getting the car back together, the noise is still evident. I’m kind of done, as I don’t have the time to drop the transmission again – in doing this job I also replaced the lower ball joints (boots were cracked), reverse switch, and the right front brake caliper that was dragging a bit. As I said, if the car needed something, I replaced it.

The car starts fine, but does idle a bit high right now, another symptom from the extended storage.


I have all parts for the interior plus many other interior duplicate parts from trips to the junkyards, eBay, and Craigslist -- Please see the pictures as all of this is included and this includes all clips and bolts and other hard to find items -- nothing is missing.


I don't have the time to address the transmission noise nor finish replacing the interior so I'm selling the car as it is with a very modest reserve.


I would prefer if the car were trailered as the car just hasn’t been on a road trip in some time. If you’re determined to drive it home, we can talk.


The car is 100% stock with the exception of the mild suspension upgrades and wheels and has never been raced. All in all a very straightforward project for a car that has had a lot of time and money spent on it.


Please don't hesitate toemail with any questions you may have.


Thanks,

Mike