1971 dodge challenger drag race car w/title

1971 Dodge Challenger Additional Info:

Up for sale is a 1971 Dodge Challenger Mopar Drag Race Car with a probuilt 440 (Monty Jones Racing) and High Performance Coan PowerGlide Transmission with 4:10 gears.

Body/Chassis:

Chassis Works:

2x3 square tubing chassis

Battle Cruiser ladder bars

Coil over Mustang II front suspension

Koni single adjustable front shocks

Rack & Pinion steering w/removable steering wheel kit

Steel floor and large wheel tubs

8-point roll cage with swing out driver’s bar

Stroud cam-lock 5-point belts will need to be recertified

Kirky 17" racing seat with cover

Autometer tach & gauges - water temp, oil pressure,volts & transmission temp

Painless 8 circuit wiring harness - matching overhead switchbox

Cheeta shifter - w/CO2 RPM controlled auto shifter (DigitalDelay)

Digital Delay Mega 450 delay box included for running in BoxClasses

Tilt fiberglass front end with custom hood scoop

Fiberglass trunk lid - rest of the car is steel – Doors are original with

factory crash bars

Removable drivers’ side Lexan window - rest of the glass is factory

Steel rear bumper on it now (have a damaged fiberglass one included)

4-wheel Wilwood disc brakes

3x15 Weld front wheels

10x15 Weld rear wheels

28x10.5x15W Hoosier slicks (should be replaced)Tubs will hold larger tires.

Dual trunk mounted batteries

Push/pull battery switch

Dana 60 shortened rear end with 4.10 gears

Mark Williams Hi-torque axles, spool, bearing caps

Strange double adjustable rear shocks

Spare 4.56 Gear set

Fuel system:

8-gallon trunk mounted fuel cell

B/G 5000 fuel filter

B/G 280 fuel pump

Quick Fuel 2 port regulator

-10 braided fuel line from cell to filter

-8 braided fuel line from pump to regulator

-6 braided fuel lines from regulator to carb

There is not return line used with this pump

Carb is a Quick Fuel/Holley hybrid 1000 CFM 4 BBL setup forE85-E90 Ethanol

Engine:

Built by Monty Jones Racing Osceola, Ne.

.20 over 440 Mopar block

Factory steel crank ground for BB Chevy Rods

Manley forged BB Chevy Rods

J&E Forged 12.5:1 pistons

Fluid dampener

Entire rotating assembly is balanced

Comp Cams custom ground mech. roller cam with matching pushrods, lifters &

Springs (CC906) - .706 lift

T&D aluminum stock style shaft roller rockers 1.6 ratio

Indy stock SR heads port matched to their Max Wedge singleplane manifold

Indy aluminum timing chain cover

CSI billet aluminum electric water pump

Sirocco style radiator with dual fans

Large transmission cooler with fan using -6 braided hoses

MSD distributor

MSD High output coil

MSD Digital 6 controller

MSD plug wires

Milodon 8qt full length oil pan w/swinging pickup

Remote mounted oil filter

Custom made 2" side exhaust headers

Transmission:

Coan power glide with their Hi Performance Slant gearplanetary & pro tree

valve body

Explosion proof bell housing

PG style transmission shield

Coan 8" Hi Perf spragless converter 5800 stall

The Wheel flex plate with adapter to a Mopar crankshaft

MW steel drive shaft assy. with HD universal joints.

This car runs and drives and comes with everything pictured please use the pictures provided as part of the description of the car and its condition. This was used as a drag car and has its share of nicks and scratches.

This car was originally setup for a 727 TF transmission and I should have the transmission mount and MW drive shaft.

I will also include all spare parts and any original parts for the car that I still have. .

This race car is sold in as is/where is condition with no guarantees. I do have the title for the car. Car must be trailered or shipped by the buyer.

Any questions feel free to contact me through this ebay auction or my cell at Five86-Five96-Zero346 for any questions before bidding as I will do my best to answer what I know on it. Thank You for looking.