Make: | Chevrolet |
Model: | Impala |
Type: | Coupe |
Year: | 1961 |
Mileage: | 250 |
VIN: | 11837L110175 |
Vehicle Title: | Clean |
Item location: | Sparta, New Jersey, United States |
1961Chevrolet Impala Bubbletop Restomod
LS2,Bagged, A/C, Lots of custom touches.
Fully sorted out, drive anywhere and look cool doing it!!!!!
I have nearly 450 photos taken just for the revision/updates that were made if you needed to see something specific.I have included many in-process photos to give you an idea of some of the work that was done.
Link below to more photos:
https://ibb.co/album/w7yS5t
When I bought the car it needed many areas addressed and sorted out to be updated/revised to what I was looking for.It needed some typical things to make it right but it also needed some special things to set it apart from other 61’s.In order to do this, I sent the car to Street Metal Concepts in Sanford, FL.
SMC performed all the work and delivered to me a car that not only was a strong cruiser that you can take anywhere, but also one with some subtle custom touches that make the car unique.
You’ll see from the list below that there was quite a bit of parts and labor and effort put into this car to make it what it is today.
The coolest feature; the car seat anchors!!I have a 2 year daughter who is a Gearhead so I asked SMC to fabricate car seat anchors so my daughter can go with me anytime.They are removable if you wanted but the fact that they are there, is COOL!
The car is fully sorted out and I drive it everywhere.I wanted a car that not only looked good but also one that I can get in, turn the key, and just DRIVE!That is exactly what SMC did for me.This car is a great revised DRIVER!The car runs at 180 degrees down the highway and revs at 2,000 RPM cruising at 70 MPH.The air blows cold, (sorted out the vintage air system and rerouted vents and ducting).
The list of items below is a snap shot of what has been done since I took ownership. I for sure am missing things but hopefully this gives you an idea of the time, effort and cost that has been invested in this car to get it where it is today.
I have an opportunity for a business investment and I am selling some toys. I also am selling my 71 C-10 on ebay now as well.
It is for sale locally so this auction may end early.
LS2with a mild cam
StingerEFI
CustomPainted Billet Specialties
22inch in rear, 20 inch in front
Frontdisc brakes
Customsheet metal work in the engine bay sprayed matte bronze to match wheels andcenter side stripes.
Customfinished trunk, (that actually looks good)
ALLNEW Air Ride System by Air Lift, (brand new compressors, bags, lines, fitting,controller, 5 gallon black powder coated tank etc)
LEDHeadlights
BrandNew Interior, (seats, carpet, mats etc)
Tanks Inc. Fuel injection/baffled fuel tank |
Fuel tank mounting straps |
Fuel tank mounting isolators |
Tube style fuel level sending unit |
Tanks inc. 255lph in-tank fuel pump |
Tanks inc. fuel pressure regulator/filter combo |
Trickflow steampipe kit |
Magnaflow mufflers |
Billet Specialties legend series "Speedway" 22x10 RR 20x8.5 FT |
Nitto Tire 555 G2 265/35/22 RR 235/35/20 FT |
Holley low profile oil pan |
Braided PTFE fuel line |
PTFE -6an hose ends 90 degree x2 |
PTFE -6an hose end 45 degree |
PTFE -6an hose ends straight x4 |
NPT to -6an fuel pump fittings x2 |
Sending unit installation kit |
Dakota digital VHX instruments |
Air Lift 3P Auto Ride Height 1/4" management system |
Air Lift 5 gallon air tank black powder coat |
Secondary compressor wiring harness |
1/4" push to connect fittings for bags |
Oil pan gasket |
K&N oil filter |
New front and rear bumpers |
Billet grille kit |
Rear bumper license plate mount kit |
Battery hold down bracket and retainers |
Washer fluid reservoir kit |
Replacement horns |
Trunk carpet and panels upholstered to match interior |
Radiator hose port adapter w/-AN hose/fittings kit |
MAP sensor |
MAF sensor |
Front and rear seat belt set |
Door window guides x2 sets |
Quarter window rollers x2 sets |
Package tray |
Door lock knobs |
Seat adjuster knob |
Seat upholstery work |
Alternator |
Trunk build out supplies and upholstery vinyl |
KYB rear shocks (correct length for lowered) 343056 |
Headlight bezel grille spacer hardware |
Headlight wiring sockets for "quad beam" |
hood adjusters and trunk rubber bumpers |
Steering column upper bearing kit |
Complete re-tune on ECU |
Radiator overflow tank aluminum |
16psi Radiator cap |
Intake bolts |
Ridetech upper control arms. |
LED replacement bulbsfor front and rear with LED flasher |
Front loop floor mats |
child seat retainers, (see pics) |
Serpentine belt |
Turn signal switch |
RT and LT rear brake wheel cylinders |
1/2" bumpstops |
Rear axle bearings |
Rear axle flange gaskets |
Differential carrier gasket |
AC Recharged |
Pinion seal |
Link to 4 more photos in the sun.
https://ibb.co/album/sjC4Nj