Make: | Chevrolet |
Model: | C-10 |
SubModel: | K-10 |
Type: | Standard Cab Pickup |
Trim: | Custom Deluxe |
Year: | 1979 |
Mileage: | 75000 |
Color: | Blue |
Engine: | 350 |
Cylinders: | 8 |
Fuel: | Gasoline |
Transmission: | Manual |
Drive type: | 4WD |
Interior color: | Blue |
Vehicle Title: | Clean |
Item location: | Rome, Georgia, United States |
1979 Chevrolet K10 Custom Deluxe bought new in Georgia. This truck was special ordered with the 350, four speed and 410 gears. I am the second owner and I have the original title marked new. This truck has been parked for over 20 years with 74,000 true miles. Since I have owned it I have had it buffed and detailed, replaced with OEM muffler, clutch and pressure plate, front calipers and brake lines, master cylinder, fuel tank and fuel lines, radiator hoses, spark plugs, spark plug wires, temperature sensor, battery, heater motor, vent tube, heater control (I actually replaced it with an AC control, because my plans were to add vintage air), dash pad, new temperature dash gauge, shocks, tires and windshield wiper blades. The engine runs wonderful and extremely quit. The running gear has been serviced and is in fantastic shape. This is a very special truck and it has not been modified or restored. If this Truck is not what I say it is, your deposit will be refunded.
This truck as you will see has had some paint work on the hood, it has very little rust (see pictures), the wood floor of the bed has been removed due to deterioration (cross members are fine), the tail gate will need to be repaired or replaced due to rust, the floor board (I removed the rubber mat so the floor can be viewed)non the passenger side has three pin holes, but very solid, the passenger rocker panel will need to be replaced, the driver side floor does have a hole (large lemon size) and I added a temporary piece of metal to keep rodents out, The driver side rocker panel will need to be replaced, the bottom of the driver door will need to be repaired due to surface rust, the passenger side front fender does have a rust spot under the battery due to battery acid. The battery holder will need to be replaced. I have dozens of pictures and if anyone needs pictures of anything I have not included, please let me know and I will add them.
Serious interest only