1979 chevrolet camaro z28 pro street blown

1979 Chevrolet Camaro z28 Additional Info:

1979 chevy camaro pro street . car is a California build with 2000 miles on it.

1. Engine- 468 bigblock, steel crank, 7/16 rods, ross pistons, rectangle port heads sst valves, crane cam, dougs headers, ceramic coated weiand intak, BDS 6-71 blower 2% under driven. 2 holley 650cfm carbs reworked, MSD ignition, and much more. 872hp @5200rpm 780 ft torque @4300 rpm.
2. Transmission- TCI TH400 full manual valve body, harden input & output shafts. tci3500 stall, b&m pro shifter
3.- Driveshaft- Strange engineering, slip yoke 3" tube, pinion yoke, 1350 spicer u-joints
4.- Rearend- Strange engineered 9'' housing w/backbrace, pro nodular iron case, 35 spline spool with 4/65 pro gears, forged aluminum support, 35 spline axels 5/8 wheel studs, 4 piston calipers complete from Strange.
5.- Rear suspension- chassis works 4-link w/ 4130 chromemoly rod ends, varishock adjustable coilovers.
6.- Front suspension- front spindles 2'' drop, flaming river steering box, ujoints, shaft tie rods, ball joints all new.
7.- Frame- stock frame painted and refinished, rear frame 2x3 mild steel, 134 wall, 8 point roll cage mild steel
8- Exhaust 3'' tube 3'' flowmasters to the rear
9.- Interior- auto meter phantom gages, 5'' tach, 5'' speedo, 2'' volt,oil pressure,water temp and fuel pump. seats from pro car ralley. 3'' lap belt. power windows, door locks, and door poppers to open doors.
10- Rims and tires- weld pro stars 4x15 with mickey Thompson s/r radials Rear 15x15 weld pro stars with micky Thompson 31x18 sportman s/r radials
11.-Body- paint deltron 2000 base coat clear coat, glass hood, shaved door handles with poppers, front fender grills and side marker lights have been removed, front and rear window molding are p coated satin black. rear wheel opens have been stretched 2''. all metal car besides hood and front rear bumper witch bumper has minor spider cracks as shown in pics (rubber bumpers)
12.- Brakes and fuel - front disk 2 piston rear disk 4 piston strange, Willwood master cylinder 1 1/8 bore, fuel pump aeromotive 150gph 14 psi -8 in hose and fittings to the front, 1/2 sst pipe to regs 3/8 sst pipe to carbs.
13.- Cooling- Be cool Aluminum radiatior 3'' to 1'' core tubes, 2 12'' Flex-lite fans, weiand aluminum water pump.
I have piles a receipts for the build way too much to list any questions call text 9788047535 or 9782089090or message on here thanks $500 24hr deposit when auction ends. payments certified bank check or cash in hand or bank wire. check needs to clear before car leaves