1985 Chevy Silverado 4x4 383 Stroker Hot Rod Custom Chevrolet C10 C/K 10 Series
Make: |
Chevrolet |
Model: |
C-10 |
Type: |
Cab & Chassis |
Year: |
1985 |
Mileage: |
6,200 |
VIN: |
1GCDC14H3FF385249 |
Color: |
Two Tone - Burgundy/Creme |
Engine: |
383 Stroker |
Cylinders: |
8 |
Fuel: |
Gasoline |
Transmission: |
350 Turbo - Automatic |
Interior color: |
Burgundy |
Drive side: |
Left-hand drive |
Vehicle Title: |
Clear |
Item location: |
Jupiter, Florida, United States |
1985 Chevrolet C-10 Additional Info:
1985 Chevy Silverado 4x4 383 Stoker – Custom Chevrolet C10 - C/K 10 Series
This is a beautiful truck with two tone paint and kept in a garage is entire life. Super Clean, Super straight, and overall one BAD ASS CHEVY 4x4 TRUCK!
- 4x4
- Long Bed
- SBC 383CI Stroker Crate Engine (blueprintengines.com)
- Dual Exhaust
- Headers
- Tow Package
- Side Step Bars
- 2 - 10in Sub-woofers
- AM/FM/Bluetooth/CD Player
- Auto Gauge Tach by Auto Meter
- Perfect Interior - Seats and dash excellent seats have cover on to protect them
- New seals entire front axle and u joints replaced February 2018
- Windshield Visor with Lights
- Front end is from a 1978 with single headlights, as 1985 has two each side
- 2 KC Running Lights mounted on front bumper
- Clear/Clean Title
View a Video: HERE
ENGINE 383 Stroker (Details-Click Here)
Purchased in 2010 from Jegs and is from Blueprint Engines and has 6K miles on engine. Just added a New 650 Holley Ultra Carb.
- Runs Great and Strong!
- No Receipts
- Lots of Receipts
Description
- HP & Torque: 405 HP / 440 FT LBS
- Compression Ratio: 9.5:1
- Cast Iron Heads
- Flat Tappet Cam
- Cast Steel Crank
- Hypereutectic Pistons
Block:
- Hand picked seasoned block
- Square and parallel decked
- Align honed main bearing bore
- Cylinders honed on computer controlled machine to within .0002 straightness and roundness
- Cylinders are sonic tested for thickness
- 4-Bolt Main
- 000" Bored .040" Over
- 1-Piece Rear Main Seal
- Mech fuel pump provision: Yes
- Passenger Side Dipstick
- Drilled and tapped for clutch linkage
Rotating Assembly:
- New BluePrint Cast steel crankshaft
- 3.750" Stroke
- OEM type 5.700" connecting rods w/ 150,000 psi bolts
- Hypereutectic pistons
- External Front/ External Rear
Cylinder Heads:
- Cast iron Vortec heads
- 1.25 diameter valve springs
- Hardened retainers and springs
- 2.02 swirl polished intake valves
- 1.60 swirl polished exhaust valves
- 1.5 long slot, stamped steel rockers
- Hardened push rods
Cam Specs:
- Cam Type: Flat Tappet
- .487 Intake .503 Exhaust
- 234 Intake / 244 Exhaust duration
- @ .050 - 112 degree lobe separation
Ignition Timing:
- 34 Degrees Total at 3500 RPM
TRANSMISSION:
- 350 Turbo –rebuilt 6K miles ago
TRANSFER CASE:
- Rebuilt at same time, 6K miles ago
TIRES:
- 33x12.50R15LT Cooper Discoverer STT
NEEDS:-
- Speedo does not work needs gauge. ($80 ebay)
- Emergency brake needs cable replaced. (Did not bother it’s an automatic)
This truck needs very little and is a turn key truck ready to be enjoyed for those offroad weekends, hunting trips or a great daily driver as well!
Please only bid with the intent to purchase, deposits are non refundable, shipping is buyers responsibility, I will assist with coordinating shipping but cost is buyers, no warranty, as is.
Inspections are welcome! (561)723-0726 text or leave a message
Located in Jupiter Farms, FL 33478
General Terms
Notice to Bidders: All of the vehicles we list on eBay are for sale locally. We reserve the right to end an auction early. All cars are immediately ready for delivery upon sale.
Deposit: We require a non-refundable $500 deposit within 48 hours of winning the auction. Please call to make arrangements for payment.
Payment Types: Cash in person, Certified Funds
All sales transactions must be completed within 7 calendar days of auction close.