Clean 88 c1500 LS swap project. Swap 80% complete. Project truck, chevy,

1988 Chevrolet C/K Pickup 1500 silverado Additional Info:

I bought the truck last Februaryout of Tennessee. It was a tbi 350/700r4 from factory. I got it home and drove it for 3 weeks and the trans went. I pulled it and in the process was going to freshen up the 350 only to find it was also shot..full of sludge and worn lifters. I decided then to do an LS swap. I had the trans bulletproofed by a locally know trans guy (have paper work). It has a small B&M stall to mach the CAM I put in the engine. All new.
The engine is a 4.8 taken out of a running 02 silverado. I tore it down and did a freshen up on it with new bearings, rings etc. I installed a thumper cam and new lifters. I had the heads completely re-done including new springs for the cam. I did the trunion update on the rockers and installed new push rodsto mach the cam. I put in a double roller timing set. All of the cam and valve trainparts are comp cams. I had the heads milled to get a little cheap compression bump. I have already had the ECM re-flashed to be stand alone. I have all of the fittings and fuel lines to hook those up to the truck intake and rails. New mid length conversion headers. Used ARP head, rod, and balancer bolts and all new gaskets of course. I have all the reciepts for the engine parts and machine work. I have the trans paper work too. Oh yea, I have the adapter brackets to install the factory a/c ompressor too and it works! I used dirty dingo mounts and B$M flexplate with 700r4 adapter.
Still needs:in tank fuel pump installed (have it)trans lines runharness done (have the truck harness)throttle and kick down cablesAll the usual connectionsand other parts re-installed for and engine R&R
The truck is nice and clean, has new grille and lights, smoothie front bumper, roll pan in the back.it has a small dent right behind the grill on the pass side front fender. A little ding in the back right under the tail light. It has helwigs big sway bars front and rear. stock rear end. Most of the interior panelsare newer. The colors are all good, the flash mede them look crappy in the pics, but the seat and carpet are very clean too.
I will sell this in any configuration ie: rolling chassis only, truck and trans, engine only, whatever. The only think I will not sell by its self is the trans because I know its right. This listing is for everything I have though. I have a little over 6k invested in all this and alot of time. The reserve is well below that. Place bids and ask questions, I will NOT disclose the reserve price so please do not ask.