CHEVROLET C20 PRO TOURING RESTOMOD HOT ROD RAT LS SWAP C10 FARM TRUCK LOWERED

1970 Chevrolet C-10 C20 Additional Info:

TRUELY A VINTAGE SHOP TRUCK WITH A BIG, BAD CHEVROLET 6.0 LS FUEL INJECTED MOTOR AND 4L80E TRANS!

OVER 12,000 INVESTED IN THE LS CONVERSION ALONE!

NO RESERVE. BID TO BUY!

THIS TRUCK RUNS AND SOUNDS GREAT! CHECK OUT A QUICK START UP VIDEO BELOW:

HERE IS A VERY UNIQUE 1970 C20 CUSTOM DELUXE THAT WAS LOCAL CALIFORNIA SHOP TRUCK. NOW FITTED WITH SOME SERIOUS POWER, IT WOULD MAKE A GREAT SHOP TRUCK AS IS, OR A GREAT PLATFORM FOR A RESTORATION PROJECT. WE HAVE NOT TESTED IT, BUT SINCE THE ORIGINAL PAINT APPEARS TO BE VERY NICE IN THE SPOTS THE WHITE WAS PAINTED, IT ALMOST LOOKS AS IF YOU COULD CUT THROUGH THE WHITE AND GET THE ORIGINAL GOLD PAINT.

THIS 1970 CHEVROLET C20 IS AS REAL AS YOU GET FOR AN AUTHENTIC SHOP TRUCK. THE HAND-PAINTED LETTERING AND PATINA ARE AMAZING! I DON'T KNOW THE TRUCK'S STORY, BUT IT WAS CLEARLY A SHOP TRUCK FOR THIS MASONRY SUPPLY STORE IN STANTON, CA.

THIS COOL OLD SHOP TRUCK WAS JUST GIVEN A NEW LEASE ON LIFE, AS IT WAS JUST FITTED WITH A CHEVROLET LS 6.0 MOTOR AND A 4L80E AUTOMATIC TRANSMISSION FROM A LATE MODEL CHEVROLET DENALI. IT ALSO GOT A POSI TRACTION REAR AXLE FROM A SILVERADO, CUSTOM 3 INCH EXHAUST, DJM UPPER AND LOWER CONTROL ARMS WITH LOWERING SPINDLES IN THE FRONT AND CUSTOM LOWERING SPRINGS AND SHOCKS IN THE REAR.THE TRUCK HAS POWER STEERING AND DISC BRAKES BOTH FRONT AND BACK.THE TRUCK STILL HAS THE ORIGINAL DUAL TANKS, BUT A NEW ALUMINUM FUEL CELL WAS INSTALLED IN THE BED.

THE TRUCK WAS ORIGINALLY A HIGHLY OPTIONED CUSTOM DELUXE. IT CAME WITH THE HEAVY DUTY SUSPENSION (C20), AC, 350 V8, POWER STEERING, GOLD PAINT AND INTERIOR.

THE INTERIOR IS VERY ORIGINAL AND SHOWS WELL. WE JUST FRESHENED IT UP WITH A NEW DASH PAD AND WE HAD THE SEAT RECOVERED. WE ALSO INSTALLED A NEW CARPET KIT. IT ALSO HAS THE ORIGINAL RADIO AND A VERY COOL HAT RACK AND THE HAT GOES WITH THE TRUCK.

OVERALL THIS TRUCK IS VERY SOLID AND SHOWS VERY LITTLE RUST. THE BED IS SOLID, THE CAB IS VERY CLEAN - THE ROCKERS, DOOR SILLS AND RAIN GUTTERS ARE VERY SOLID. THERE IS A SMALL AREA BEHIND THE PASSENGER'S DOOR ON THE LOWER PART OF THE CAB THAT COULD BE REPAIRED.

HIGHLIGHTS:

- 6.0 FUEL INJECTED CHEVROLET LS MOTOR - THIS THING SOUNDS AND RUNS AMAZING!

- FULL CUSTOM DRIVELINE

- NEW SUSPENSION

- NEW BRAKES

- NEW RADIATOR / FAN

- NEW INTERIOR

- FRONT AND REAR DISC BRAKES

- POSI TRACTION REAR AXLE FROM MODERN SILVERADO

- SUPER COOL PATINA

- VERY SOLID TRUCK

VIN DECODED:

CE231Z645986

C: 4X2

E: V8 GAS

2: 3/4 TON

4: CAB WITH BED

0: 1970

Z: FREEMONT, CA

126633- SERIAL

DEPOSIT IS REQUIRED WITHIN 24 HOURS OF COMPLETION OF AUCTION. THE BALANCE WILL BE DUE WITHIN 7 DAYS OF COMPLETION OF THE AUCTION AND CAN BE MADE BY WIRE, CASH OR CERTIFIED CHECK. ONCE THE PAYMENT HAS CLEARED, SHIPPING OR PICKUP CAN BE ARRANGED BY THE BUYER.

CONTACT ME WITH ANY QUESTIONS AND I WILL BE HAPPY TO ANSWER THEM PROMPTLY.

EMAIL: VIA EBAY

PHONE: 310-600-1182

NOTE: I HAVE LISTED THIS LOCALLY AND RESERVE THE RIGHT TO CLOSE THE AUCTION AT ANY TIME.

PRODUCTION HISTORY

A new, more modern look came in 1967, along with a new nickname: "Action Line". It was with this revision of the C/K truck that General Motors began to add comfort and convenience items to a vehicle line that had previously been for work purposes alone. Updated styling features for the 1967 Chevy Pickup trucks came with new body sheet metal that helps fight rust and a pickup box made of double-walled steel. The majority of 10 and 20 series Chevrolet trucks from 1967 to 1972 were built with a coil springtrailing armrear suspension, which greatly improved the ride over traditionalleaf springs. However, the leaf spring rear suspension was still available on those trucks, and standard on 30 series trucks. The front suspension on all Chevrolet trucks were independent front suspension with coil springs. GMC models came standard with leaf springs with coils springs optional; all four-wheel drive models (Chevrolet and GMC) had leaf springs on both axles. 1967 was the only year for the "small rear window" (RPO A10 offered a large rear window as a factory option[3]). The standard drivetrain came with a three-speed manual transmission and one of two engines; the 250 in3straight six or the 283cuin (4.6L) V8. The optional transmissions were the four-speed manual, the Powerglide and theTurbo-Hydramatic350 and 400. The 292 six and the 327 in3V8 were the optional engines. The 1/2 ton trucks came with a 6 x 5.5–inch bolt pattern, the 3/4 and 1 ton trucks came with an 8 x 6.5–inch bolt pattern.

The most visible change in differentiating a 1968 from a 1967 was the addition of side-marker reflectors on all fenders. Also, the small rear window cab was no longer available. The GMC grille was revised, with the letters "GMC" no longer embossed in the horizontal crossbar. Another addition was the Custom Comfort and Convenience interior package that fell between the Standard cab and CST cab options. In 1968, Chevrolet celebrated 50 years of truck manufacturing, and to commemorate, they released a 50th Anniversary package, which featured an exclusive white-gold-white paint scheme. Also in 1968, the Longhorn model debuted on 3/4 ton trucks. Featuring a 133-inch wheelbase identical to the one-ton vehicles, it added an extra 6 inches to the bed. Longhorns, interestingly, were 2wd only; no factory Longhorn 4x4 was built.

The 327 c.i. V-8 engine was enlarged in 1969 to 350 CID (stroke increased from 3.25 to 3.48) with a net horsepower rating of 195-200, depending on emissions package 255hp (190kW), 350cuin (5.7L). Along with the new engines came a new grille design for Chevrolet trucks and a more upright hood for both Chevrolet and GMC trucks. A utility variant, known as theK5 Blazer, was also introduced with a shorter wheelbase of 104 inches (2,642mm). The GMC version, known as the Jimmy, was introduced the same year. Some internal cab changes were also made, most notably the switch from a hand-operated parking brake to a foot pedal, and a more modern looking two-spoke steering wheel with plastic horn button replaced the previous year's three-spoke wheel with chrome horn button. Also new this year were upper and lowerside moldings, which added another two-tone paint option. These were standard on CST trucks, and optional in any other trim level.