/ /

1969 DODGE DART GT CONVERTIBLE, 440 SIX PACK AUTO TRANS

Make: Dodge
Model: Dart
Type: Convertible
Trim: GT
Year: 1969
Mileage: 4280
VIN: LP27B9B183170
Color: Black
Engine: 440 SIX PACK
Cylinders: 8
Fuel: Gasoline
Transmission: Automatic
Drive type: RWD
Interior color: Black
Drive side: Left-hand drive
Vehicle Title: Clear
Item location: Seattle, Washington, United States

1969 Dodge Dart GT Additional Info:

1969 DODGE DART GT CONVERTIBLE, 440 SIX PACK AUTO TRANS
This is a 1969 Dodge Dart GT convertible, with a '69 440 six pack w/ a '69 727 transmission, Center Console. This is quite possibly one of the nicest Darts that you will ever see, an absolute blast to drive…you will not be disappointed. This a great ride that provides me and my wife with a lot of enjoyment. Under hard acceleration when the end carbs kick in there is absolutely no other feeling like it. You are going to love this car as much as I do!
First and most important to me is that this car is not a clone. I did not change any of the badging nor do I represent this car as anything other than what it is, a 1969 Dodge Dart GT convertible. I built a car that I wanted and that I wished that Chrysler had built. I am selling the car because I want to start a new project and I would like to use the sale funds to help finance the build.
The very first Schumacher Creative Services products were developed for this car - starting with our Wiper Seal Gasket Kit. I bought the Dart in the fall of 1986. Basically from that point until 2003 it served as a test mule for our products, especially the wiper seal kit and our first motor mount bracket kits, the 340 and big blocks onto the slant 6 K-member.
The Dart started life as a Slant 6, bench seat, B5 blue car. But it did have an original am/fm radio and power brakes. I felt that as long as I didn't try to build it into a clone, I could do anything I wanted with it - build the car I wanted, just have fun! Although the project changed in many ways over the years, one goal was there from the beginning; the car, along with power steering and power brakes, had to have a 440 Six Pack that looked like it belonged there. Attention to detail was what made that goal attainable, and it is what makes this car special. The car has become a wonderful showcase for our products. But its most important function has been the one it was intended for long before it helped start a business - a great ride that provides me and my wife with a lot of enjoyment. Under hard acceleration when the end carbs kick in there is absolutely no other feeling like it. You are going to love this car as much as I do!
• The only negative is that there is no canvas on the top. It functions beautifully I just never got around to finishing the top. I have a new canvas but I never really saw the point. I have never driven it in the rain. If this bothers you I will pay for professional installation out of the sale funds.
• The car has been featured in all of our ads as well as an August 2007 article in Mopar Muscle…Top Down And Flyin’.
• The article link is as follows:
http://engine-swaps.com/Pages/ArticlePages/Top_Down_Flyin.html
• I personally stripped the car down to bare metal and it has zero rust. The left rear quarter panel was replaced but the work was done professionally and the Dart is laser straight.
• I tried to use original parts as much as possible for example: all of the original nuts and bolts were bagged, labeled, cleaned, thread chased and then reused.
• The hood inserts and trunk finish panel decal were made from our design by Clay Wood.
• The bright teal engine paint is a play on Chrysler's turquoise and our company colors. The splatter paint on some of the accessories and trim add a little levity to the engine compartment.
• The amber turn signal lens are from Brazil. I'm not sure how rare they are but I've never seen them before.
• The Dart has a clear title.
• 4280.3 Miles after restoration.
• I have a partial broadcast sheet.
• I am a private seller so please contact me with questions for more information. I may have missed something that you want to know or a photo that you want to see…so please ask questions! I will respond ASAP. I have been the owner of this car for 33 years, there is nothing that I don’t know about it. So again, PLEASE ASK QUESTIONS!
• Car is located in Seattle WA. Local pick-up is welcome. YOU, THE BUYER, ARE RESPONSIBLE FOR PICKUP AND ARRANGING DELIVERY. I will gladly help a shipper with loading if necessary. You may arrange to look at the car in person if you like.
•I will acceptPayPal for a NON refundable Deposit only. A $1000 deposit is required within 24 hours of the auctions closing.
• I will accept Wire Transfers from all over the world, Certified Check, Money order, Cashiers check, Cash in person. The vehicle will not be released until the funds clear. I will not pay a shipper from money you send me.
• Full payment is required within7days of auction close
• No financing or trades.
Build Specs:
1969 Dart build specs:
• Actual vehicle weight 3600 (no driver)
• TTI 2.5" exhaust w/ "H" pipe
• Max Wedge mufflers w/ 2.5" in and 2.5" out, custom built by Accurate Exhaust
• Stainless steel exhaust tips
• Custom built Magnum 500 wheels w/ Spinner option (Stockton Wheels and Wheel Vintique)
rear @ 16x8 w/ 4.685" B.S., P235 55 16 Eagle GA
front @ 16x7 w/ 5.25" B.S., P215 60 16 Eagle GA
• shocks @ KYB front and back
• .89" torsion bars (factory A-body 383 type bars)
• Rear springs from Eaton Springs, built to standard 383 A-body specs with
1 extra leaf added per side
• Power steering
• Power assist brakes - stock Chrysler (peanut) Midland Ross power brake booster
• 1973 A-body front disc brake (4.5" bolt pattern)
• Chrysler A-body 8.75 axle assembly, sure grip differential, '41 case w/ 3.73 gear.
Third member w/ gears purchased from Randy's Ring and Pinion
•Standard A-body axles redrilled for the 4.5" bolt pattern.
Engine
• 1969 440 HP totally rebuilt, balanced and blueprinted
• stock 440 steel crank
• Bored .030 over
• Compression ratio @ 9.25/9.5 to 1
• Mopar Performance cam shaft:
lift @ .455/.455, duration @ 272/272
• Cast iron heads w/ a 3 angle valve job and hardened exhaust valve seats
• Manley valves @ 208 intake and 175 exhaust
• Edlebrock aluminum 6 bbl intake w/ 3 Holley carburetors
• Electronic ignition - Mopar Performance silver box (hidden under the dash)
• A-body "M" code manifolds - casting #'s @ 3462017 LH, 2863900 RH
Misc
• Custom made hood and trunk finish panel inserts
• Stock AM/FM radio w/ 32 pin MP3 player cord (hidden in the console)
• Speakers hidden in the kick panels
• RH rear view mirror
• Amber grill turn signal lenses from Brazil