/ /

1963 Chevrolet Impala 409 425 HP Survivor 36K Orig Miles Near Flawless Rare Cool

Make: Chevrolet
Model: Impala
SubModel: 409 425 HP Survivor Rare
Type: 2-Door Sport Coupe
Trim: 409 Survivor
Year: 1963
Mileage: 36,685
VIN: 31747J210809
Color: Ermine White
Engine: 409 425 HP
Cylinders: 8
Fuel: Gasoline
Transmission: 4-Speed Manual
Drive type: RWD
Interior color: Red
Vehicle Title: Clear
Item location: San Clemente, California, United States

1963 Chevrolet Impala 409 425 HP Survivor Rare Additional Info:

1963 Chevrolet Impala 409
Flawless Original Survivor Car
3-Owner Car

VIN #31747J210809

36685 Original Miles from New
(on chassis)
(685 mi since Complete Comprehensive Engine Rebuild)

Irmine White
(80% Orig Paint from the Factory)

Red Fabric/Vinyl
100% Factory Original Upholstery/Carpet New
(Seats, Door Panels, Dash, Headliner, Trim, Int. Chrome all Orig)


409 Cubic Inch 425 HP Big Block V8
Date Coded QB 425 HP
(Rebuilt in 2007 @36K miles)

4-Speed Muncie
(rebuilt 2007)
Twin-Disc McLeod Clutch
(light-weight clutch, easy shifting)
Chrome Air Cleaner
Chrome Valve Covers
Dual Exhaust 3”
Hooker “Competition Plus” Headers
Drum Brakes w/Huge Brake Shoes

AM/FM “STEREO” Radio/Dual Speakers Front
One Rear Speaker
(Orig Radio Conversion to Modern Electronics)
(Push Button to change from AM-Green Light to FM-Red Light)

Oil Pressure and Temperature Gauges Added


Original Bench Seat
Stock SS Tachometer on Column
Original Spare & Jack
(Original “New” Spare Tire in Truck)

Firewall-All Original Paint and Stencil Marked
(Marked “Red” for Interior Color)

Original Registrations back to 1991
Owners Hand Written Record Book
since 1 May 1996 @ 34569 miles
All Receipts for Engine Rebuild
Brakes, etc

1963 Impala

VIN # Decode: 31747J210809

3 1963
17 Impala L6
47 Two Door Sport Coupe
J Janesville Plant

210809 Sequential Serial Number


Engine Decode: T0207QG

T Tonawanda Plant
02 Assembly Month
07 Assembly Day
QG 409 340hp Automatic

(see photo of stamp pad; broach marks are clearly visible)

Cowl Tag Decode:

2B February 2nd Week

63 1847 Body JA 25556
Year Impala 2 Dr HT Sport Coupe Jaynesville 874 936
Impala Cloth Red Bench Seat Ermine White

Receipts in last 200 Miles Driven:
6-03 New Radiator & Heater Core (Ike) $500

9-04 409 Engine (Purchase) 6000
Hooker Competition Plus Headers (Brand New) 500
4-Speed Muncie 350

12-04 Summit Racing 207
Muffler Clamps, Swivel Hangers,
3 - Aluminized Pipe 3.00 X 4
2 - Fully Welded Muffler
2 - Weld On Collector Rings
2 - U-Bend 3” 4.5” - 6.5”
2 - U-Bend 3” 6” - 10.75”
12-04 Bow Tie Chevys 155
Pair - Frame Brakets (for motor mount conversion)
Motor Mounts-Side for 409
409 Fan Shroud 298

5-04 Classic Industries 486
63-64 F/S Tachometer 7000 RPM
Inner Glove Box Assembly
Heater Core B/Body
Red Loop Carpet Set

6-04 Chrome Redone (Ike) 500
(Note: Trim All Original including Badges)

2-05Classic Industries 373
61-63 BB Radiator w/o AC 4 Row MT
Impala Hood Insulation
1963 Full Size Assembly Manual
62-63 409 Fender Emblem (Repro - High Quality OEM)

3-05Bow Tie Chevys 101
60-64 Floor Shift Boot Ring - Bench Seat
63 Gear Shift Lever (for Bench, Adapts to Hurst)

4-05 Bow Tie Chevys 135
Coil Bracket, 409 Dipstick, Rad Cap (w/o AC)
V8 Road Draft Tube & Grommet, 409 By-Pass Hose
Clamp, Radiator/Heater Hose Clamps Set

4-05Summit Racing 777
Distributor, 3/8 SS Fuel Line, Pulley Crankshaft
2 - 500 CFM Carburetors

9-05 CarQuest Parts 106
Coil Springs, etc

9-05 Classic Industries 187
2 New Wheel Cylinders, Control Arm Bushings Red,
Poly End Link Kit Red, Tie Rod End Dust Boot

11-05 Show Car Automotive 517
63-64 409 Air Cleaner

2-06 Meditronics Corp. 188
Muncie Rebuild Kit (4-Speed)

8-06CarQuest Parts 199
Brake Shoes, 2 Wheel Cyl Kits, Axle Housing Gasket,
Performance Shocks


6-07 Ross Racing Forged Pistons (Summit Racing)$607


6-07 Bob Small’s Automotive Machine Shop 702
Grind Crank Shaft, R & R Cam Bearings
Hone Block, Deck Block, Surface Cylinder Heads,
Wash Heads & Block, Balance V8, CHS Cam Bearings

6-07 Bob Small’s Automotive Machine Shop 842
Rod Bearing, Main Bearing, FelPro Gasket Set
Melling High-Volume Oil Pump & Oil Pump Drive
ARP Rod Bolt Kit (Stock), SBI Rocker Arm Kit,
Exhaust & Intake Valves

6-07 Tru Roller Timing Gear Set 100

6-07 Rocker Arms Studs Type (w/Ball & Nut) 107

6-07 Isky Solid Cam 175

6-07 Powder Coat Complete Inner Fenders (Ike)

6-07 Trans Rebuilt (Ike)

6-07 Driveshaft Balanced (Ike)

6-07 Gas Tank, Shocks, Master Cylinder (Ike)

TotalParts (plus Misc not counted)$6762

Total for Engine, Trans, Headers 6850
(plus Labor by Owners Shop) ???
Total Conversion to 409 (parts only)$13612 ++
(not including Labor)


BEFORE YOU READ ANYTHING ELSE…. YOU MUST WATCH THIS VIDEO… MAKE SURE YOU GO FULL SCREEN AND TURN YOUR SPEAKERS UP TO THE MAXIMUM TO HEAR THIS SWEET MUSIC, WATCH IT ALL THE WAY TO THE END OF VIDEO!!

https://www.youtube.com/watch?v=Ot9s44qwwFY


Note: There are close to 200 pictures in this eBay listing. Depending on the age of your computer and your internet connection it may take several minutes for all of the pictures to load into this ad. The photos are all hosted on Photobucket and if you have trouble loading these pictures to this ad simply to to this link:

http://s669.photobucket.com/user/fmattingly/library/Chevrolet%20Impala%20409%20Ike



“THE MAN BEHIND THE MACHINE”



“well I saved my pennies and I saved my dimes… “

Nothing could be closer to the truth when in the Summer of 1963 a young Ike Shelton strolled into Huffines Chevrolet on Garland Rd in Garland, TX to buy his brand new Chevy Impala 409. Ike had been working since age 12 at the local filling station to save up for his first car, the one he planned on racing. Ike was one of the youngest AHRA Racers at Green Valley Raceway. He sold that car a couple of years later to buy a 66 Corvette.
Actual pictures of Ike in his 409 in January of 1964 and this 409 recently:



Ike has owned many cars since that new 409 in 1963 as he has spent his whole life around automobiles and motorcycles building and racing hundreds of cars and bikes for himself and customers along the way.
The Viet Nam War was on and Ike found his way into the Marine Corp in 1968 and came out a Jet Engine Tech. He started building custom motorcycles in his spare time and his hobby morphed into his first business in 1971, “Show & Go Cycles”, in Richardson, Texas, which just happened to be his Dads old grocery store location.


For 30 years Ike built bikes and cars in Richardson, Texas, later adding and becoming one of the premier plating companies in the nation for high-end builders and enthusiasts. Ike’s fine metal finishing work became the staple for many multi-million dollar Pebble Beach Concour Restoration Winners.
In his spare time Ike raced Top Fuel Motorcycles all over the Country.
Ike has an eye for detail like few I have personally known. He grew his shop to 15 employees over 30 years and in 2001 decided to move his family to California, working and residing in San Clemente. His shop S&S, is now Ike and his son Jason, another artisan in the automotive/motorcycle world, just like his Dad. They have for the last 15 years put together some of the most beautiful cars and motorcycles to be displayed at our local shows in and around Southern California. If you seek out the best in automotive anything, from fixes to fabrication, to engine rebuilding to full-blown restorations contact them through their company S&S in San Clemente, CA, website at:

IkeandJason.com


From the website: “We can fabricate, custom design, refurbish, or create the project of your dreams. Our passion, skills and commitment for details can turn your vision into a reality. Hot rods, muscle cars, customs, motorcycles are all in our repertoire.”





“Giddy Up... Giddy Up... Giddy Up 409!!




It had been 25 years since Ike had driven that first 409 of his youth when he started dreaming about recreating that experience. He was at an auction in 1990 and stumbled across a gorgeous survivor 1963 Impala that was born with a 6 cylinder motor. The second owner was there and began to tell him about the “freak” first owner of the car. This elderly gentleman had owned it from new and when he pulled it from the garage to sell it to owner number two he remarked that it had never been driven “even once” in the rain. Personally, I doubt that this car has rarely ever seen the light of day, except when it was occasionally driven.


Since Ike’s ownership in 1990 it has rarely been outside for more than an hour at a time and it is constantly under cover even in the garage.


Body & Paint


The beauty of the car to Ike was that it was completely original paint, interior, motor and at that time around 30K miles on the clock. The body panels and floors are all original sheet metal to the car... and yes it shows. Just look how straight and letter-perfect the doors, the hood and the trunk align to the other body panels. Close-up pictures of the shut-lines will display the exactness in fit and finish, that can never really be replicated. If you are local to Southern California, bring your micrometer and check it out yourself.

The body and paint are clearly indicative of a car having a virgin body from day one. The original body panels are all intact on this Impala and it shows in the magnificent application of it’s mostly original paint. When Ike was doing the motor restoration he decided to disassemble the front-end of the car to clean the engine area and powder coat the inner fender wells. You can literally eat off the engine, surround and undercarriage. There were a few slight imperfections in the paint from rocks over the years and Ike decided to repaint the front fenders and a small amount of the hood at that time. He dug into his concour restoration skills to carefully mix and match the paint finish to the exact color and texture of the original paint.


I consider myself an expert in “survivor” original paint as I have judged many Survivor Corvettes at NCRS Events and am hard pressed to see any variation in the paint on the front-end versus the front windshield to rear of this specimen. To say this is a masterful job of matching to the original paint would be an understatement.


If you are into laser straight original body panels, you will not find one nicer than this. It is obvious that this is the product of living a garaged life since it was delivered new from the dealership.
At the time of engine restoration the bumpers were replated and need I remind you, Ike was in the plating business for over 20 years, he did concour quality work. Any questions?




Interior


The interior on this ageless beauty is nearly impeccable. The only thing that is not original is the carpet; the time/color continuum had taken its course and with the addition of the four-speed on the floor it was time to be replaced. Other than the carpet the entire interior and all its bits are factory original. The tach was seamlessly integrated, just like it was stock, during the motor restoration. The seat upholstery as well the door panels, the headliner and dash are all completely original from the factory and are simple a 10 out of 10 on the Survivor Richter Scale. Steering wheel looks like it is brand new.


Just take a look at some of the close-up pictures under the dash of the original wiring and the corner trim pieces on the doors showing the original felt and the condition. Check out the dash (two small crack areas around speaker), the interior paint and headliner, the pedals, the knobs and door window cranks… all original and simply pristine for a survivor. Even the rubber in the doors and window surround is original and in extremely good condition. Door window chrome surround is mint as is the original glass. Windshield is ORIGINAL (the old non-tint) and in great shape. Amazing.
An original Phillips 66 Lube Sticker is still in the door jam with a date of 6-18-83 with 31,148 miles.
Time Capsule. Period.







“Trunk-a-licious”… that’s the only way I can describe it. Just take a look at all the original speckled paint, jack, and original “new” Uniroyal spare tire, having never been used. Ike put some new mats in the back, but underneath are the original trunk liners. The original jacking procedure sticker is still affixed to the underside of the trunk and is like new.





Engine and Mechanicals



At the top of that famous mill, a heavy duty double-snorkel air cleaner forces oxygen into two large 4-barrel carburetors. Fuel and air flow from the new Edelbrock carburetors into a factory iron intake that's bordered by factory Chevrolet heads and chromed factory valve covers. And this B-Body's entire engine compartment, from its Chevy Orange paint and satin black fenders, is completely restored, detailed and ready to both show and go.
The car is sporting 3.08 gears, which is perfect for cruising… and if you have watched the video already you know that is all it needs to get up and roll.


Ike had been looking for a date coded ’63 409 since the day he purchased the car in 1990. Finally around 1999 Ike stumbled across a gentleman at “Hot August Nights” that knew a local Southern California guy that happened to have a rebuilt one sitting in his garage, waiting for the right car to put it in. Ike convinced the owner to sell it. Upon putting the engine in the car Ike was not happy with the performance and felt it was 100hp shy of it’s potential; so out it came and into Ike’s shop for a full restoration. Details can be seen in the receipts section above. Needless to say, Ike did everything to perfection.
The car had exactly 36K miles on it in 2007 when Ike & Jason starting rebuilding the motor. Today it stands at 36685, the day we took the pictures.


Ike and Jason put their 50 plus years of experience in racing automobiles and motorcycles together in building this motor for themselves and one only has to listen with speakers full throttle to hear the wondrous echoing of an engine built by perfectionists.






Undercarriage


The chassis is very clean and original. Ike lightly freshened the original red primer paint and some of the black undercoating, but it is basically exactly like it was. The front end suspension was all powder coated along with the inner front engine bay panels when Ike had the engine out for the rebuild.






I have taken pictures of a few of the major receipts listed above for your review. Note Bob Smalls, the engine machine shop is notably one of the best in Southern CA for doing high-end engine machining. Bob is a master craftsman and “Precision” is his middle name.






The car drives, shifts and runs like a dream. It rolls down the road on a brand new set of B.F. Goodrich Radial T/A’s, straight as an arrow, with no shakes, rattles or imperfections anywhere in the handling or braking tendencies of this car.


This fully sorted Impala Sport Coupe is a wonderful car to drive, enjoy and haul three or four of your coolest friends in. It's really no surprise that these cars are amazingly popular with almost everyone who sees them because they have such a great combination of style, presence and performance.
Just as a matter of reference I have been collecting and restoring collectable automobiles and motorcycles for the last 40 years and am a friend of Ike. I am a member in good standing with the Porsche Club of America, the 356 Registry and NCRS (National Corvette Restorers Society) for over 25 years. I have been a Concour Judge at various venues around Southern CA.
This little coupe is the kind of master piece to be added to your collection if indeed you have a penchant for low mile survivor type of cars. You would be hard pressed to find a more solid, original and wonderful driving vehicle than this example in Irmine White with Red Interior.
These rare survivor cars are getting harder and harder to find. A Survivor like this one is much like an historical document. Cars like this tell a story of its construction, ownership and care. The restoration process, while sometimes stunning, erases the originality and authenticity, and is just another “done” car. These things are special.
409. For millions of people in the world, just a number. For some, however, it is the numerical code for a phenomenon that defies technical description. To put it another way: for them, it is the legend of the Chevy 409.

You saved up your pennies.. and you saved up your dimes....
.... now it’s time to buy your BRAND NEW 409... Giddy Up.. Giddy Up...

For Additional Information call:

Frank at 949-310-6262 or visit... or visit Ike’s Website and feel free to call him direct, that is if you can wait for him to get out from underneath some wonderful project he and Jason are working on. The car is stored in San Clemente, CA and available for viewing upon request.



TERMS & CONDITIONS:

The car is for sale locally and we reserve the right to cancel this auction at any time before the end of the auction. We do not have a Buy It Now Price listed.

The car will be made available for inspection by serious bidders throughout the auction. Please e-mail us if you would like to see the car. If you prefer, we can arrange to have a qualified, independent, professional mechanic perform a pre-purchase inspection for you (at your expense).

PLEASE NOTE THAT WE WILL NOT ACCEPT PAYPAL AS A FORM OF PAYMENT. THIS IS TRUE FOR BOTH THE INITIAL DEPOSIT AS WELL AS THE FINAL PAYMENT.
Winning bidder must contact us within 24 hours of auction end, and make arrangements for payment at that time. A $500.00deposit is due within 48 hours of end of auction. The deposit can be made by cash (please do not mail cash!), bank check, cashier's check, or bank transfer (preferred). The remainder is due within 10 days of Auction end. The remaining balance must be made in the form of a bank transfer (preferred) Cashier'scheck, or bank check (all forms of payment subject to verification). PayPal will not be accepted as a form of payment for either the deposit or the final payment. If no contact is made within 24 hours we reserve the right to re-list the vehicle, sell it to the next high bidder, or sell it otherwise. Please arrange financing prior to bidding. Once the final balance has been paid, title transfer paperwork will be initiated.
Buyer is responsible for pickup or shipping of this vehicle. If you wish to have it shipped using a service, we will gladly cooperate, you can locate shippers by doing a search for “auto shippers”. We have relationships with both domestic and international shippers should you need some assistance.

This vehicle is being sold as is, where is with no warranty, expressed written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the vehicle and to have satisfied himself or herself as to the condition and value and to purchase based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the vehicle. Please Check My Feedback- I value my 100% positive rating, and will do my best to keep it.

The winning bidder should have the car insured from the time the final payment is made to us. Once final payment is made, we will exercise a generally accepted standard of care, but the buyer assumes all liability and risk once the final payment is made.
Before delivery of the vehicle, the winning bidder must provide a photocopy of a valid driver’s license. Delivery is defined as the time at which physical possession of the car is transferred from us, the seller, to the buyer or the buyers’ agent or chosen transport company.
If you are not sure about something, Please ASK. Do not assume anything not listed is included. We reserve the right to cancel bids for excessive negative feedback. We reserve the right to end the listing if the vehicle is no longer available for sale.