/ /

1969 Chevrolet Camaro, X44, RS, 427LSX

Make: Chevrolet
Model: Camaro
SubModel: X44
Type: Coupe
Trim: RS
Year: 1969
VIN: 124379N682409
Color: Red
Engine: 427 LSX
Cylinders: 8
Fuel: Gasoline
Transmission: Manual
Drive type: RWD
Interior color: White
Vehicle Title: Clear
Item location: Dayton, Ohio, United States

1969 Chevrolet Camaro RS Additional Info:

1969 Chevrolet Camaro. X44 car with RS upgrade and many overall upgrades making this one extreme protouring Camaro. Needs approximately 3 weeks worth of work to be completed. Please read below for all details. I am deployed in Afghanistan, I can respond to all emails, but for anything local to Ohio I will have to coordinate with the shop owner and sales will be handled through my POA.
The quick rundown on the car is I started this while I was working in Iraq. The car was stripped, acid dipped, and built back up with new or NOS parts. I sent it to Classic Resurrection in Columbus, OH who did the perfection work on the body panels, prepped for paint, painted and assembled the car back to roller form. The Paint is PPG Sunset Red over Pure Gold. The grey paint used is called PPG Grigio Ingrid, it is a Ferrari stock color code. I have the invoices at my house and I can have them made available. Over $60,000 spent at Classic Resurrection. The car was then sent to Dayton Performance Motorsports where it received a hand built LSX427 engine with forged internals, 12 bolt custom Moser 4.11 rear differential, BMR torque-arm coil-over rear suspension assembly, keyless entry and remote trunk popper, all new wiring kit with 18 circuit/fuse configuration, and more with a PDF invoice adding up to $53,445.51. The invoices do not include the majority of the parts I purchased, in total I have spent $180,000.Below is a short list of parts I pulled from email invoices, other parts not listed include the Global West Stage 4 suspension up front with GW tubular A-arms; SSBC Force-10 4-piston 14" disk brakes up front, all stainless steel brake lines, Tremec TKO-600 5 speed trans (Hurst short shift kit and shifter ball white), chromoly driveshaft (needs painted or powdercoated, last shop ground off the powdercoat for some reason), VintageAir system (it was a stock AC car, added the VintageAir to make it up to date, comes with the VintageAir compressor extra since I got a matching one with the Drive Junky satin AL kit); new center console with gauges, LED tail lights, and probably a lot more I can't remember.Interior needs assembled the rest of the way, glass installed, stereo equipment was stolen so you will need to purchase and install, finish the rest of the wiring (mostly completed, interior needs finished wiring and not sure what is left to get the engine started as far as wiring goes). I can put you in contact with the last mechanic to work on the car, it is currently stored at a friend's shop/garage. The mechanic I just mentioned is out of the state at the moment and unable to complete the car becauseof that reason. This is the 3rd place I have sent the car so I'd prefer to just sell it rather than find another shop and lose parts in the moving process again, hence the reason for selling before it is completed.With all of these mods the suspension should allow for over 1g skidpad. The engine is limited to 600HP due to the Holley Terminator EFI system; this is on purpose since the car is not caged, the BMR torque-arm system and Global West subframe connectors re-inforce the chassis to handle 600HP and will make this a great handling car. A lot of weight has been removed from the stock Camaro, depending on what you add this car will be under 3,000 pounds; with current parts installed I believe it weighs just over 2,700 pounds, so 600HP should be plenty. If you hunger for more power, simply change out the throttle body system or change from the carb look to anything you want; engine should be capable of over 700hp...just make sure you modify the chassis to handle the power increase and note the driveline is manufacturer limited to 650hp/650 torque. I have engineered this car to max out these specs without causing any driveline or chassis failures, a lot of design and thought went into this build. If the end result is a 3,000 pound car with 600hp, that will give you a car with 1hp per 5 pounds. For reference all of these cars have "pounds per horsepower" over 5: 2017 Dodge Viper SRT 5.24, 2017 Chevrolet Corvette Z06 5.42, 2017 Chevrolet Camaro ZL1 5.97, 2017 Dodge Challenger SRT Hellcat 6.29.
Many specialty parts on this car (Some not installed) include:
Anvil Auto:Real carbon fiber: fender braces, A-pillars, lower steering column cover and radiator closeout panel ($1,000 total)
Crutchfield:App-Tronics SmartVision Mirror (dash cam, backup camera, and Bluetooth; $300)
Camaro Central:1969 Dash Plates Set, Rosewood / Cherrywood Woodgrain, CompletePark Light Assemblies Set, PairFront Close Out Filler Panel Insert, Lower Body(Above order: $626.58)INT-471969 Master Interior Kit, Deluxe, Coupe, Houndstooth[Dash Pad Type:With A/C][color:White][Rear Seat:Stationary][Window Crank Knob Color:Clear][TMI Sport Seat Upgrade:Upgrade includes TMI Sport Covers & Bucket Seat Foams]EMB-512Air Cleaner Cross Flag Emblem, Die-Cast, 427INT-9561967 - 1969 Front Bucket Seat Tracks Set, LH, 2 PiecesINT-9571967 - 1969 Front Bucket Seat Tracks Set, RH, 2 PiecesCon-9001968 - 1969 Console Shift Plate Indicator Pattern Plate, Manual 5-Speed, OE StyleINT-1606A - 1968 - 1969 Door Jamb Air Vent Louvers, Billet Aluminum, Black Anodized, PairHDL-318 - 1969 Headlight Assemblies Set, 7 Inch, Xenon High Intensity Discharge (HID) [Choose Bulb Housing:PROJECTOR STYLE]emb-92 - 1969 Fender Emblem, "427" Engine Size, EachDAS-228 - 1969 Dash Air Vent Outlet Assembly for Non-AC, LHDAS-225B - 1969 - 1978 Center Dash Air Vent Outlet Duct Adapter For Vintage AirDAS-833 - 1969 Dash Air Vent Outlet Housing and Duct, RHDAS-225 - 1969 Dash Air Vent Outlet Assembly, Air Conditioning, Center, BlackTRU-3 - 1969 Camaro Molded Trunk Mat - OE StyleINT-1200-69 - 1969 Floor Mats Set, Front and Rear, Carpeted, Custom with Embroidered Logos and Colors[Choose Carpet Color:BLACK (01)][Choose Floor Mat Logo Design:CAMARO BY CHEVROLET (289S)][Choose Floor Mat Logo Thread Color:METALLIC SILVER (1002)]FUE-467 - UNIVERSAL GAS FILL FLIP TOP CAP LID STAINLESS STEEL HOSE VENTED(Above order total: $3,990.31)HTR-821969 Air Conditioning System Kit (Vintage Air Gen IV) $1,299.95WIN-3051969 Camaro Windshield Wiper Motor Hidden System With Delay Switch $559.95WIN-1B1967 - 1969 Windshield Washer Fluid Reservoir Bottle Jar and Bracket Kit $26.95WIN-521967-1969 Windshield Wiper Arms / Blades Kit - Stainless Steel - Coupe $59.95(Above order total: $2,002.95)
RIDLER 695 WHEELS (18x8, 18x9.5) (2 came with chrome center caps, and 2 with matching grey, ordered 2 more in the grey for a matching set of 4)
TireRack:DUNLOP DIREZZA ZII STAR SPEC TIRES (275/35R-18, 235/40R-18, 245 were not available) installed and mounted on Riddler wheels ($1,079.96 tires)
Summit Racing:QTI-RM-6036 Bellhousing, QuickTime, Steel, SFI Approved, Chevy, LS to Manual Transmission, KitRAM-80-2100 Clutch Kit, Force 10.5 Twin-Plate, Organic Disc, 1 1/8 in. Diameter Shaft, 26-Spline, Chevy, KitAWR-HMGM01101SR Throwout Bearing Conversion, Hydraulic, Hydramax, GM, TKO/Muncie/Saginaw/Richmond/Lenco, Kit($2,654.76)ARP-234-4319 - ARP Pro Series Cylinder Head Stud Kits $554.74CRN-1449221 - Crane Hydraulic Roller Camshafts Hydraulic Roller Tappet, Advertised Duration 291/299, Lift .590/.590 $440.00EDL-28457 - Edelbrock Victor Jr. LS1 Carbureted Intake Manifolds $355.97MEL-10295 - Melling Performance Oil Pumps $119.97NAL-12499225 - Chevrolet Performance Hydraulic Roller Lifters $135.97NAL-19260093 - Chevrolet Performance LSX Bowtie Engine Blocks $2,469.97NAL-19299099 - Engine Hardware Finishing Kits $256.97SCA-1-41901BI - Scat Engine Rotating Assemblies: Forged Crank, Forged Pistons, I-Beam Rods $2,557.97SCC-SCP1099BL - Scorpion LS Race Series Rocker Arms $397.97TFS-19005 - Trick Flow® Track Max® Late Model Harmonic Dampers $189.97TFS-3061T003-C03 - Trick Flow® GenX® 235 Cylinder Heads for GM LSX Competition Ported, Assembled, 70cc CNC Chambers, Ti Retainers, 6-Bolt $1,274.98TFS-30678534 - Trick Flow® Billet Steel Timing Sets Double Roller, Billet Steel Sprockets $129.97 (FYI: powder coated cover)VC-0081 Granatelli Motor Sports Billet Valve Covers $1,249.971103 Hamburger Valley Cover $213.36($10,347.78)
Holley:Holley Terminator EFI with 3.5" touch screen kit PART# 550-405K $2,399.95HOLLEY LCD TOUCH SCREEN 5.7" LCD display PART# 553-103 $713.95
Entropy Radiator:1967 - 1969 Camaro LS1 LS2 Swap Radiator - LSX-370 ($809)
Classic Industries:395865569 FBODY COMPLT SEAT FRAME-LH ($278.99)395865669 FBODY COMPLT SEAT FRAME-RH ($278.99)R809069 CAM DASH GRAB HNDL/MLDG KIT ($124.99)
Screamin Performance Parts:Camaro Chin Spoiler 69$125.00Camaro custom Rear Package Tray 67-69$325.00Camaro Custom Kick panels 1969$350.00 (I believe these were stolen from the current shop along with my Infinity Kappa 6.5 component and 6x9 speakers, Infinity amp for interior speakers and Infinity Bass-link subwoofer, retrosound media receiver unit, satellite radio unit and antenna and bluetooth connectivity device; these things I mention so you know what to replace with in order to provide the connectivity I planned; I can be contacted for anything after purchase)Total Shipping: $81.00Total: $881.00
BMR:BMR-TAS001 Torque arm suspension kit, GM 1.00 1.00 0.00H 12-bolt differential 1967-1969 F-Body BMR-TASEH Box E for TAS001H, TAS004H, TA 1.00 1.00 0.00 S007H, TA003H, TA005H, TA007H 1967-1981 F-Body BMR-TASFH Box F for Torque Arm Suspensio 1.00 1.00 0.00 n 1967-1981 F-Body BMR-TASGH Box G for TAS001H, TAS003H, TA 1.00 1.00 0.00 003H, and TA004H 1967-1969 F-Body BMR-TASJH Box J for TAS001H,TAS003H,TAS0 1.00 1.00 0.00 04H,TAS006H,TAS007H,TAS009H 1967-1981 F-Body BMR-TASDH Box D for TAS001H, TAS002H, an 1.00 1.00 0.00 d TAS003H 1967-1969 F-Body BMR-TASLH Box L for TAS001H, TAS002H, TA 1.00 1.00 0.00 S003H, TA003H, and TA004H 1967-1969 F-Body VIK-C205W Viking coil-over, 3.82 stroke, 2.00 2.00 0.00 dbl adj, eye/eye, wid brg, eaVIK-9DP225 Viking coil-over spring, 9" lo 2.00 2.00 0.00 ng, 225 lb rate, 2.5 ID, each(Above total: $2971.10)
Drive Junky:BRUSHED ALUMINUM HIGH A/C LS Serpentine Drive System With Edelbrock water pump ($2,414)
American Autowire:Voltmeter ($131.25)
Firewheel Classics:WSK-07_08 - 68-69 Camaro O.E.M. Upgrade Weatherstrip Kit - Coupe Deluxe (WSK-08) - $248.95STP18502 - 67-69 Camaro Power Steering Gear Box - $375.95(1) DS122001_122002 - 68-69 Camaro Electric RS Headlight Door Kit 69 (DS-122001) - $425.99/set = $425.99(1) SMK02K - 69 Camaro Side Marker Kit - $49.95/ea = $49.95(1) TL23 - 69 Camaro Tail Light Gasket Set - $10.95/pr. = $10.95(1) SB-3P - 67-69 Camaro 3 Point Retractable Seat Belt Set - $329.95/set = $329.95(2) SB25R - One Camaro Rear Seat Belt - $99.95/ea = $199.90(1) 500661_500686 - 67-68_69 Camaro Classic Update System 69 (500686) - $559.99/ea = $559.99(1) 10425_20455 - Dynamat Xtreme - $209.99/Kit = $209.99(1) EMRP03 - 69 Camaro "RS" Rear Panel Emblem - $24.95/ea = $24.95(2) EMF907 - 69 Camaro 350 Fender Emblem, Repro - $13.95/ea = $27.90(1) EMG02RS - 69 Camaro RS Grill Emblem - $24.95/ea = $24.95(1) TL-6901L_6901R - 69 Camaro RS LED Taillight Lens LH RS (6901L) - $105.95/ea = $105.95(1) TL-6901L_6901R - 69 Camaro RS LED Taillight Lens RH RS (6901R) - $105.95/ea = $105.95(2) TL20 - 69 Camaro Taillight Stud & Nut Set - $8.95/ea = $17.90(1) VT20_23 - 67-69 Camaro Vinyl Top White (21) - $89.95/ea = $89.95(1) WS52 - 67-69 Camaro Air Conditioning Core Support Seal - $9.50/ea = $9.50(1) GLM731 - 67-69 Camaro Roofrail Weatherstrip Blowout Clip Set - $12.95/set = $12.95(1) WS80 - 67-69 Camaro Weatherstrip Channel Screw Set - $12.50/set = $12.50(1) WSH02 - 67-69 Camaro U-Jamb Seal Screws - $1.50/set = $1.50(1) WSK06_08 - 67-69 Camaro O.E.M. Upgrade Weatherstrip Kit - Coupe 68-69 Deluxe Interior(08) - $239.00/ea = $239.00(1) ws48_49 - 67-68 & 69 Camaro Steering Column Seal 69 (49) - $7.50/ea = $7.50
Heartbeat City Camaro:INT-2501 Camaro Dash Carrier Tach Clock 140mph $1,199.95 (This part is missing, may be at the shop, if not this is what I had planned to install. The original dash assembly and gauges are still available to use)
Protouring Superstore:GL-6774CMR1967 -1972 Camaro / Firebird Glass[Glass Color:Smoke Gray Tinted][Camaro Year:1968 & 1969 Camaro][Body:Coupe]Total:$750.00
AutoAnything:SSBC Force 10 Single-Piston Performance Brake Kit-Rear (with parking brake) $1,179.95
Stainless Steel headers for LSX in 69 Camaro chassis, with Dirty Dingo motor mounts, with optional ceramic coating ($1,475.00)
I have the stock SS steering wheel, the stock walnut wood steering wheel with horn kit and also a NRG Innovations ST-010CFRS Carbon Fiber Steering Wheel with Leather Accent (350mm 1.5" Deep Red Stitching; $290)...so your choice on which one you install.

On Mar-11-17 at 14:31:00 PST, seller added the following information:

Car does have a clear title.
And I see it's not clear right away, but this car has a hand built 427ci LSX engine.

On Mar-14-17 at 08:33:06 PDT, seller added the following information:

Over 500 pictures located here of the build:http://s701.photobucket.com/user/69Cam620/library/Camaro%20Hellfire%20Project